Danh mục sản phẩm

NHÀ CUNG CẤP

Danh mục sản phẩm > > Shaft Speed Sensor > 906 / 907 XP
906 / 907 XP
Mã sản phẩm 906 / 907 XP
Nhà Sản Xuất Electro Sensors

Shaft Speed Sensors - Hall Effect

Features
  • NPN open collector, square-wave output
  • Zero speed operation with no signal loss
  • Non-contact, large gap distance sensing
  • Signal transmits up to 1,500 ft
  • Simple to install and set up
  • Powered by 5-24 VDC


These speed sensors use magnet-sensing Hall Effect IC's to produce a digital pulse signal to interface with speed switches, tachometers, counters, signal conditioners, or PLC's. Hall Effect sensors provide true zero speed operation with square-wave output and immunity to electrical noise.

A pulser disc or split collar pulser wrap with embedded magnets is mounted on the monitored shaft. As the shaft rotates, the magnets pass in front of the sensor causing the sensor to switch high and low, thus producing a digital pulse output. The sensors provide a digital square wave signal with a 50/50 duty cycle when used with pulse generators that have evenly spaced magnets of alternating polarity, such as Electro-Sensors Model 255 Pulser Disc. The recommended gap distance between the sensor and pulse generator is 1/4 inch +/- 1/8 inch. The gap flexibility makes the sensors tolerant of vibration, shaft run-out, misalignment, and industrial environments.

906
Model 906 sensors are water resistant and suitable for industrial applications, including environments where dirt, dust, grease, or moisture are present. The 906 standard sensor has a threaded aluminum body, and is supplied with a mounting bracket and 10 ft of cable. The bi-directional (906B) option has two sensors and is designed for applications requiring both speed and direction information.

Optional EZ-3/4in Easy Sensor Mount (for 906 only)
(see EZ-3/4in page for more details)

Features
•  Mounts directly to the tapped shaft
•  Can be used with optional Mounting Magnet  if shaft is not tapped
•  Pulser disc is included (8 PPR)
•  EZ-3/4in is for the 906 and 932 sensors

 906 with EZ-3/4in Mount                 EZ3_4_w_MM_1_25_web.jpg

                   EZ-3/4in & 906                               EZ-3/4in, 906, and MM-1.25 Mounting Magnet

 907 XP (Explosion Proof)
• Class I, Div I (D) Class II, Div I (E, F, G) Class III
• XLB-3 enclosure
907 XP sensors are used in applications requiring hazardous location ratings, or in applications where the sensor may be subject to abuse. It has a 1-inch NPT conduit opening for wiring, terminal strip for wiring, and is provided with a mounting bracket and 10 ft of cable. The bi-directional option (907B XP) has two sensors and is designed for applications requiring both speed and direction information. Specify vertical alignment when the magnets will pass vertically in front of the sensor face, and horizontal alignment when the magnets will pass horizontally in front of the sensor face.

Optional Mounting Magnet: MM-2.00 (For 907 XP Only)
(See EZ Mounting Magnets Page for More Information)
• No Drilling or Tapping Required!
• MUST be used with the EZ-100 Mounting Bracket


» Shaft Speed Sensor - Model 1101: 0 VND (1101)
» Shaft Speed Sensor - ST420: 0 VND (ST420)
» Shaft Speed Sensor - ST420-LT / ST420-DI: 0 VND (ST420-LT / ST420-DI)
» Shaft Speed Sensor - SpeedTalker-DN(BH) DeviceNet: 0 VND (SpeedTalker-DN(BH) DeviceNet)
» Shaft Speed Sensor - Series 18: 0 VND (Series 18)
» Shaft Speed Sensor - HE950: 0 VND (HE950)
» Shaft Speed Sensor - FB420: 0 VND (FB420)
Liên Hệ Trực Tuyến

(  (08) - 3511.5746

Ê  (08) - 3511.7931

È 0919.051.919

sales@cntruongthanh.com


SẢN PHẨM CHÍNH
encoder
sensor
burkert
krohne
kuebler

Cảm Biến - Sensor

Lượt truy cập



TRUONG THANH INDUSTRIAL CO., LTD.
29-31 Dinh Bo Linh Street, Ward 24, Binh Thanh District.
Telephone: 08-3511.5746      Fax: 08-3511.7931
Email: sales@cntruongthanh.com
Hotline: 0919.051.919
Copyright © 2010 cntruongthanh.com
Phát triển bởi N N H
www.cntruongthanh.com