Danh mục sản phẩm

NHÀ CUNG CẤP

Danh mục sản phẩm > Motrona Accessories

BT348
Mã sản phẩm: BT348
Nhà sản xuất: Electro Sensors

Motrona Accessories

Features

Suitable for simple remote operation with all motrona controllers and units from other manufacturers using the same serial protocol (Drivecom, Lecom)
Low-cost solution for readout and remote setting of single parameters on control units and drives
Also suitable for remote display of actual measuring values via serial link
Easy operation and set up by means of three front keys


BT600 - BT700
Mã sản phẩm: BT600 - BT700
Nhà sản xuất: Electro Sensors

Motrona Accessories

Features

For operation with Motrona controllers, many standard HMI terminals are available on the market
The following products provide very easy set-up when used with Motrona products, because the Motrona communication protocol as described under SERPO is already installed. Both units are universal HMI Touchscreen Devices with 2 serial ports, for simultaneous and integrated operation with Motrona controllers and PC / PLC controls
For some cut-to-length applications Motrona can supply HMI firmware with complete screen masks and operator screens (available on request)e


ES001
Mã sản phẩm: ES001
Nhà sản xuất: Electro Sensors

Motrona Accessories

 Features

Testing unit for generation of all typical encoder output signals
Outputs A, /A, B, /B, Z, /Z with any level between 5 and 30 volts
Output frequency adjustable from 0 to 500 kHz
Marker pulse output with programmable distance
Selectable direction of rotation (phase A/B)
Indexing mode for generation of a fixed number of output pulses in multiples of 1, 10, 100, and 1000 pulses
Suitable best for testing of cables and wiring in a machine, for “dry run” with the machine in standstill, for multiple operational testing and setup of counters, meters and converters needing incremental input signals


ES002
Mã sản phẩm: ES002
Nhà sản xuất: Electro Sensors

Encoder Simulator and Tester

Features

For input signals A, /A, B, /B, Z, /Z with PNP or NPN switching behaviour
Frequency range from 25 Hz to 500 kHz
Encoder supply 5, 12, 24 VDC
Evaluation of frequency, rotating speed, phase, signal quality and power consumption by means of a cost-free PC-Software
Creation of test reports in PDF-Format


FK470
Mã sản phẩm: FK470
Nhà sản xuất: Electro Sensors

Motrona Accessories

Features

Ribbon cable for easy cascading of two encoder
spitters type GV470 (mounted side-by-side).
Sub-D-9 connectors (male) on both sides,
length 10 cm (3.94").


RL203
Mã sản phẩm: RL203
Nhà sản xuất: Electro Sensors

Motrona Accessories

Features

Suitable for use with all motrona units providing transistor switching outputs
Each relay with 2 dry changeover contacts for 230 VAC / 2 A or 24 VDC/ 3 A
RL203 provides 2 standard PCB relays type Omron G2R-2
RL204 provides 2 safety relays type Elesta SIR 282 with forced guided contacts
PCB with plastic frame for DIN rail mounting


NT215
Mã sản phẩm: NT215
Nhà sản xuất: Electro Sensors

Motrona Accessories

Features

Wide-band input range 85 - 264 VAC (50 - 60 Hz) or 90 - 375 VDC
Output 24 VDC (+/-1%), 630 mA, 15 watts
Dimensions 22.8 x 75 x 96.7 mm (0.9 x 2.95 x 3.81")
Particularly suitable for supply of all Motrona units needing a 24 volts DC power supply


PB251
Mã sản phẩm: PB251
Nhà sản xuất: Electro Sensors

Motrona Accessories

Features

Universal gateway for easy connection  of motrona units to a PROFIBUS network (PROFIBUS DP-V1)
Provides a simple and easy way of PROFIBUS communication with all counters, indicators, converters and motion controllers shown in this brochure (if equipped with DRIVECOM protocol)


RL204
Mã sản phẩm: RL204
Nhà sản xuất: Electro Sensors

Motrona Accessories

Features

Suitable for use with all motrona units providing transistor switching outputs
Each relay with 2 dry changeover contacts for 230 VAC / 2 A or 24 VDC / 3 A
RL203 provides 2 standard PCB relays type Omron G2R-2
RL204 provides 2 safety relays type Elesta SIR 282 with forced guided contacts
PCB with plastic frame for DIN rail mounting


Next»
Liên Hệ Trực Tuyến

(  (08) - 3511.5746

Ê  (08) - 3511.7931

È 0919.051.919

sales@cntruongthanh.com


SẢN PHẨM CHÍNH
encoder
sensor
burkert
krohne
kuebler

Cảm Biến - Sensor

Lượt truy cập



TRUONG THANH INDUSTRIAL CO., LTD.
29-31 Dinh Bo Linh Street, Ward 24, Binh Thanh District.
Telephone: 08-3511.5746      Fax: 08-3511.7931
Email: sales@cntruongthanh.com
Hotline: 0919.051.919
Copyright © 2010 cntruongthanh.com
Phát triển bởi N N H
www.cntruongthanh.com